日本大科能 CZ502W 舜恒塑膠原料有限公司 防火塑膠原材料 Techno-UMG Co., Ltd. 1-9-2 HIGASHI-SHINBASHI, MINATO-KU TOKYO 105-0021 JP CZ503W-(jt) Polycarbonate/Acrylonitrile Styrene Acrylate (PC/ASA), furnished as pellets Color Min. Thk (mm) Flame Class HWI HAI RTI Elec RTI Imp RTI Str ALL 1.5-1.7 V-0 - - 50 50 50 Comparative Tracking Index (CTI): - Inclined Plane Tracking (IPT) kV: - Dielectric Strength (kV/mm): - Volume Resistivity (10x ohm-cm): - High-Voltage Arc Tracking Rate (HVTR): - High Volt, Low Current Arc Resis (D495): - Dimensional Stability (%): - (jt) - Replaced by a to e denoting UVA content %. NOTE - "Techno", "ABS", "AES", "JSR" , "MBS" and "MUH" are optional. Material designation suffix starting with the word "Type" is optional.. "AES" is Acrylonitrile Ethylene-Propylene (Co-Polymer) Styrene. ANSI/UL 94 small-scale test data does not pertain to building materials, furnishings and related contents. ANSI/UL 94 small-scale test data is intended solely for determining the flammability of plastic materials used in the components and parts of end-product devices and appliances, where the acceptability of the combination is determined by UL. Report Date: 2013-04-27 ? 2018 UL LLC Last Revised: 2013-04-29 IEC and ISO Test Methods Test Name Test Method Units Thk (mm) Value Flammability IEC 60695-11-10 Class (color) 1.5-1.7 V-0 (ALL) Glow-Wire Flammability (GWFI) IEC 60695-2-12 °C - - Glow-Wire Ignition (GWIT) IEC 60695-2-13 °C - - IEC Comparative Tracking Index IEC 60112 Volts (Max) - - IEC Ball Pressure IEC 60695-10-2 °C - - ISO Heat Deflection (1.80 MPa) ISO 75-2 °C - - ISO Tensile Strength ISO 527-2 MPa - - ISO Flexural Strength ISO 178 MPa - - ISO Tensile Impact ISO 8256 kJ/m2 - - ISO Izod Impact ISO 180 kJ/m2 - - ISO Charpy Impact ISO 179-2 kJ/m2 - -